CS-Connector – DIN – DN20 (23.0 x 1.5 mm) – EHEDG

EHEDG-Approved Hygienic Design

Our EHEDG-approved weld-in flange is designed for installations with high standards for hygiene, ease of cleaning, and food safety.

The connector’s design has been tested and approved in accordance with EHEDG’s guidelines for hygienic design. It ensures a smooth, easy-to-clean transition between the connector and the piping system, without any unhygienic edges or areas where product residues and microorganisms can accumulate.

The connector is manufactured and stocked specifically to meet DIN and ASME standards. This allows the connector’s inner diameter to be adapted to the piping system, ensuring a uniform and hygienic product flow.

TRANSPARENT QUALITY DOCUMENTATION

The EHEDG-approved weld-in flange is supplied with an EN 10204 3.1 material certificate as well as a component certificate in accordance with EN 13445, AD2000, and PED 2014/68/EU

Documentation regarding the EHEDG and TÜV design approvals is available on our website.

The tank manufacturer can include the TÜV approval directly in its design documentation and therefore does not need to perform separate strength calculations for the connector.

DRAIN HOLE WITH QUICK LEAK DETECTION

The integrated drainage solution ensures effective drainage around both the top of the clamp and the joint itself.

The drain hole also serves as a leak indicator, so that any leak becomes visible quickly. This increases operational reliability and makes troubleshooting and maintenance easier.

HIGHER PRESSURE CLASS

Our EHEDG-approved Clean Seal Connector is approved for PN10 or PN16, depending on the size—corresponding to a maximum allowable pressure of 10–16 barg. It is therefore well-suited for installations with higher requirements for both pressure resistance and hygienic safety.